Recycled Waterproof change Robe
We are the supplier of Dry robe supplier for more than 8 years, Our main product is surfing dry robe, beach change robes. towel robe, recycled waterproof dry robe and etc.
Our dry robe is 100% waterproof and recycled, with two big outside pocket,reverse YKK zip, fleece warm lining and etc.
We also use the long sleeve or short sleeve Waterproof Change Robe for winter surfing, camping, cycling, hiking, paddle and water sports.
Recycled Waterproof change Robe,Beach Surfing Robe,Swimming change Robe,Long Sleeve Change Robe Suzhou Golden Gamrnet MFG Co.,Ltd , https://www.svchangerobe.com
The following general safety precautions must be taken when working in a light incubator. Failure to take these safety measures or to follow the warnings described elsewhere in this manual will violate the safety standards for the design, manufacture and use of incubators.
1. After the light incubator has landed, if the ground is not flat, it should be leveled.
2 , in order to ensure personal safety, the ground wire (E) of the power socket should be connected to the earth.
3. When the incubator is in normal operation, the placement of the contents in the box should not affect the air circulation to ensure uniform temperature and humidity inside the box.
4. The incubator should be placed in a cool, dry, well-ventilated place away from heat and sunlight. Place it smoothly to prevent vibration from generating noise.
5. The surface and inner wall of the incubator should be wiped frequently to keep it clean.
6. If the incubator is not used for a long time, the power cord should be unplugged to prevent the incubator from being injured by electricity. It is necessary to run it regularly for 1~2 days according to the conditions of use to avoid aging damage of some devices.
7. When doing the low temperature test below 10 °C , the ambient temperature should not be too high, and the temperature difference between the inside and outside of the box should not be greater than 20 °C to ensure the normal operation of the light incubator.
8. If the incubator fails, it should be repaired by a professional or a manufacturer.