Method of routine maintenance and maintenance of laboratory equipment

The daily maintenance and maintenance of equipment and equipment is an important part of equipment technology management. Its purpose is to prolong the service life of equipment and maintain its good performance and precision. It is a preventive and protective measure to ensure the normal operation of equipment and equipment. It is the basis for ensuring the normal and smooth progress of laboratory teaching and scientific research. Let's take a look at the routine maintenance and maintenance of laboratory equipment.

1. The laboratory must establish a strict post responsibility system. According to the characteristics and requirements of the instruments and equipment used, the corresponding maintenance measures should be formulated and implemented carefully, so that the maintenance of the equipment and equipment can be regularized and institutionalized.

2. It is necessary to strengthen the basic operation training of experimental technicians, familiarize them with the performance characteristics of instruments and equipment, master the basic operation methods, and avoid damage accidents caused by improper operation or mistakes, especially the use of large-scale precision instruments and equipment, and strictly enforce the certificate. The system is strictly forbidden to operate large-scale precision instruments without training and unqualified personnel.

3. For equipment, spare or equipment that needs to be sealed for a period of time due to insufficient tasks, it should be regularly cleaned, checked, and protected from dust, rust and moisture.

4. Common equipment maintenance

(1) Electronic equipment

a. Very electronic equipment should be cleaned regularly, dusted, and regularly energized to prevent components from being damaged by moisture.

b. Regularly perform part inspection and performance testing to understand the technical status and ensure that the equipment is always in good working condition.

c. Equipment that uses a rechargeable battery to maintain its data or program internally, and should be powered on regularly.

(2) Mechanical equipment should be cleaned, lubricated, rust-proof, dust-proof, moisture-proof, anti-corrosive, etc.

(3) Laboratory environmental condition adjustment equipment

a. The anti-submersible filter of the air conditioner indoor unit and the dehumidifier should be cleaned at least once every two months, and the outdoor unit should be regularly maintained and cleaned to improve the heat dissipation effect. This is both a need to improve efficiency and effectiveness, and a need to prevent overload-induced fires and damage to equipment.

b. Indoor ceiling fans and fans should be cleaned regularly, dusted, and lubricated.

In order to extend the equipment of our laboratory, we have applied the above routine maintenance and maintenance methods.

Laser Tape Measure

Laser Tape Measure 2 in 1, as its name, it is one product with traditional tape measure and digital laser distance measurer. Laser measure tape can measure 40m with laser measurement and 5m of the measuring tape. Convenient, smart, accurate, laser tape measure make every measurement simple in life!