With long range distance sensor with digital output, you can measure and monitor distances intergrated to your arduino, raspberry pi etc. The Laser Distance Sensor low cost is a competitive measure sensor, can measure from 3cm to 40m, 100m, max to 150m with +-1mm~+-3mm accuracy. Also, other requirements can be customized, like distance sensor analog output,long range ir sensor. We will give you full technical support when you testing our long distance sensor.
Long Range Distance Sensors,Long Range Sensor,Long Range Laser Sensor,Laser Ranging Sensor Chengdu JRT Meter Technology Co., Ltd , http://www.rangingsensor.com
1. Turn on the gel imaging system switch.
2. Turn on the computer and the system automatically turns on and enters the imaging software.
3. Open the front panel of the gel imaging system and choose to use the UV or white light transmission source to place the corresponding light source in place.
4. Place the sample on the sample stage of the transmitted light source.
5. Select the Upper white light source in the imaging operation interface and click the green (immediate imaging) button.
common problem
1. Is the higher the pixel, the better the product?
Pixels are to be viewed for imaging devices. For example, the pixels of a digital camera and a CCD are not comparable, and the quality of the CCD itself is more important than the pixel level. The important indicator for the same level of CCD* is its size, which is the CCD size. The larger the size, the more its own value grows geometrically.
2. What are the main uses of UV light source?
The UV-reflecting lamp source is not widely used, and is mainly used for providing imaging services such as paper chromatography for non-transparent materials. Because the more commonly used transparent agarose gel and polyacrylamide gel, the transmission source can be fully satisfied, so the UV-reflecting light source as an option is not included in the standard.
3. Can I cut the gel directly on the gel image?
TOCAN gel imaging can, if you need to directly cut the glue, first press the observation window in the middle of the system, open the observation window with imported anti-UV glass, and then open the small door designed for the tapping on the left and right sides, you can cut the glue. operating.
4. How to adjust the focal length focusing aperture to get high quality pictures?
The three important tunable parameters are focal focus and aperture. Among them, the focal length adjusts the sharpness, the focus adjusts the image size, and the aperture adjusts the brightness and darkness. Generally, after adjusting the aperture to the appropriate brightness, adjust the focus to put the image to *large, and then adjust the focal length. In the case of larger image, the focal length is easier to adjust to the *clear state, and then the image is scaled to the appropriate size. After imaging.
Gel imaging general procedure