In order to reduce the occurrence of nebulizer failure and prolong the service life, it is not enough to use it correctly. It is indispensable to learn and master some simple fault maintenance and daily maintenance knowledge. 1 fault repair 1.1 Turn on the power pump does not work The cause of the failure is: Poor contact of the power cord or battery power. Solution: Remove the bottom of the barrel and connect the power cord firmly or charge the battery. 1.2 leakage at the bottom of the barrel The reason for the failure is that the water inlet pipe or the outlet pipe connection of the water pump is loose or broken. Solution: Tighten or replace the water pipe connection. 1.3 Poor atomization The reasons for the failure are as follows: A nozzle has foreign matter that is blocked or not tightened, the second filter is blocked, and the three-handle switch valve is blocked. Solution: First, remove the foreign matter inside the nozzle and tighten the nozzle. The second is to clean the filter. The third is to repair or replace the handle switch. 1.4 The body intermittent beat The cause of the failure is: a spray flow rate is too small, the two outlet pipes have leakage. Solution: First, replace the nozzle. The second is to tighten the outlet connection. 2 routine maintenance 2.1 Cleaning nozzles, filters After the operation is completed, remove the nozzle and the filter, soak it in clean water, and rinse it with running clean water after 5 minutes. This will wash off the liquid particles remaining on the print head and the filter. Otherwise, the liquid will corrode the nozzle and the filter, reducing its service life. After cleaning, put it in a ventilated place to dry. 2.2 Maintaining the Battery In order to prolong the life of the battery, the battery must be used up and used before the first three uses. In the slack season, since the electric sprayer is not used for a long time, the battery should be put in a ventilated and dry place and charged once every one month. The charging time is 1-2 hours. Do not store it after use. 2.3 Maintenance of the pump When spraying, the chemicals used are generally acidic or alkaline and have a certain amount of corrosion. So after each use, pour half a bucket of clean water to spray it, so that you can remove the residual liquid, and you can achieve the purpose of cleaning the pump.
Kidney Medicine powder,Seabuckthorn Extract Powder,Red Peony Root Extract,Lansoprazole Ingredients Powder,Nebivolol HCL Ingredients,
Kidney Medicine powder,Seabuckthorn Extract Powder,Red Peony Root Extract,Lansoprazole Ingredients Powder,Nebivolol HCL Ingredients Xi'an Henrikang Biotech Co.,Ltd , https://www.henruikangbio.com
Now we have 3 GMP standard workshop, Meanwhile, the factory is equipped with the researching and quality inspection centre, with strong technology research and development strength. We also have 3 salesdepartments over 30 people and sell our products all over the world.
For customer`s needs, OEM service is also acceptable. If you have a good idea in new product production but lack of laboratory device and human resource, we are glad to solve this problem for you. Sincerely hope to strengthen exchanges and cooperation with friends from both home and abroad.