The operation of the combine harvester must follow strict operating practices. When encountering special circumstances, it must be performed in accordance with the specific operating instructions. 1. Slope operation Try to avoid cross-slope driving operations; when harvesting on long-distance slopes, you should increase the back of the sieve and use larger sieve holes. The inlet opening should be reduced to reduce food losses; when harvesting at short distances, you do not need to Adjustment; when harvesting long distances downhill, the back of the sieve should be lowered. 2, windy weather operation The unit should not run in the wind direction to prevent the unit from working properly; the air inlet on the side of the grain clearing organization should be adjusted to be smaller, and the air inlet on the leeward surface should be increased. The purpose is to reduce the loss of grain blowing and improve the quality of the grain. 3, the operation of low crops For proper adjustment and modification of the header and reel, the height of the header shall be kept at a height of 15 cm and the cutting knife will not eat soil. If the cutting is too low and the knife will eat soil, the knife wear will be accelerated. Accidental damage and damage, the reel will be adjusted downwards and backwards for proper harvesting; increase the unit forward speed to ensure the normal threshing feed; along the direction of the sowing line can reduce the increase caused by the advance speed The unit's strong vibrations also reduce harvesting losses. 4. Operation of over-dry and over-ripe crops Adding canvas strips on the wooden flipper platen to increase the cushioning effect of the reel wheel in the reeling and reduce the loss of grain; reduce the height of the reeling wheel so that the reeling wheel does not hit the head of the crop to reduce the loss. Grain; Reduce reel speed to reduce the number of hits on the cutting crop. 5, wet field operation When the harvester is operating at a low level, the harvester driving device should be converted into a tracked or half-tracked type to harvest crops in time; when the depth of mud feet is large, increase the unit's ground wheel width to enhance anti-skid ability and expand grounding as much as possible. Area to prevent the machine from sagging. 6. Operation of lodging crops Appropriately reduce the unit's forward speed; correctly select the unit's harvesting direction, the unit's direction of advance should be opposite to the crop fall direction (known as the back cut), or 45 with the fallen crop. The angle between the left and right sides (called the side cut); adjust the forward and downward adjustment of the reel to ensure the smooth reeling and normal cutting.
Structure and composition: It is made of 100% cotton gauze with X-rays or without X-rays after degreasing, bleaching, drying, processing, cutting and folding.
Product performance: Clean, soft, non-toxic, odorless, non-fluorescent, no oil spots, no mold spots or debris adhesion, and has good water absorption performance.
Model specifications: Sterile type. The color is mainly white, supplemented by blue and green. Specifications are divided into 5 * 5-4 / 6/8/12, 7.5 * 7.5-4 / 6/8/12, 10 * 10-4 / 6/8/12, 10 * 20-4 / 6/8/12 , 5 * 70/3 * 100/5 * 100, etc .; with or without light, can be folded according to different requirements.
Packing: Each 1-10 pieces are packed with medical paper / paper / paper bags, medical blister packaging, single chip microcomputer, then, 20 bags / 50 bags / 100 bags of white card or gray card box, and outer layer is 5 layers of double corrugated kraft paper box.
Scope of application: It is used for medical institutions to clean clinically, protect wounds and absorb exudate from the body. It is used for surgery and wound care.
Sterile Medical Gauze Swabs Sterile Gauze Sponges,Sterile Medical Gauze Swabs,Sterile Surgical Gauze Compresses,Sterile Medical Cotton Gauze Swabs Shaoxing Gangfeng Hospital Products Co.,Ltd. , https://www.gangfenggauze.com