Fiberglass Mesh
Fiberglass mesh is made by soaking and coating with macromolecular alkali-resistant latex on the basis of C-fiberglass and E-fiberglass. The color of fiberglass mesh is white, black, organge, blue, yellow or as per customer's needs. And the fiberglass mesh's package can also as per customer's requirement to finish. The fiberglass mesh be widely used on : wall reinforcement, reinforced cement products, waterproofing favrics, the roof waterproof, enhance the skeleton of plastic and rubber, fire prevention board, highway parements, joint tapes of buildings.
The advantages of fiberglass mesh:
high strongth
good alkali resistance
prevent cracks and deformations
easy to be constructed
more durable
Fiberglass Mesh,Fiberglass Mesh Screen,Woven Fiberglass Mesh,Fiberglass Mesh Tape ANPING COUNTY SHANGCHEN WIREMESH PRODUCTS CO.,LTD , https://www.scwiremesh.com
Plug socket of nabulization unit, plug socket of tube and O/L button are set on the obverse side, and it is convenient operate.
Convenient to replace the dust screen. Open the cover of dust screen, then take out of the dust screen to clean and replace.
Operating instruction:
1, take out of the power cord from the buttom of device and switch on the power.
2, open the top cover and plug the tube into the vent port of the obverse side of device.
3, Plug the other side of tube into the vent port (lacated bottom of mebulization unit).
4, plug one side of connecting piece into the channel(located the bottom of nebulization unit).
5, plug the other side of connecting piece onto thje channel (located the obverse side of nebulization unit).
6, add the medicine into the nebulization cup
7, open the O/L button
8, the device begins to nebulize
Power supply: AC220±22V,50±1Hz
Max negative pressure compressing pump: ≥0.15MPa
Free air flux compressing pump: ≥10L/min
Max nebulizing rate: ≥0.10mL/min
Noise: ≤65dB(A)
Contact us:
Tel: 0086-514-87018668
       0086-1381539311
Convenient to operate
Plug socket of nabulization unit, plug socket of tube and O/L button are set on the obverse side, and it is convenient operate.
Convenient to replace the dust screen. Open the cover of dust screen, then take out of the dust screen to clean and replace.
Operating instruction:
1, take out of the power cord from the buttom of device and switch on the power.
2, open the top cover and plug the tube into the vent port of the obverse side of device.
3, Plug the other side of tube into the vent port (lacated bottom of mebulization unit).
4, plug one side of connecting piece into the channel(located the bottom of nebulization unit).
5, plug the other side of connecting piece onto thje channel (located the obverse side of nebulization unit).
6, add the medicine into the nebulization cup
7, open the O/L button
8, the device begins to nebulize
Power supply: AC220±22V,50±1Hz
Max negative pressure compressing pump: ≥0.15MPa
Free air flux compressing pump: ≥10L/min
Max nebulizing rate: ≥0.10mL/min
Noise: ≤65dB(A)
Contact us:
Tel: 0086-514-87018668
       0086-1381539311
Model NO.: STY-018
HS Code: 9018909000
Model NO.: STY-018
HS Code: 9018909000
Convenient to operate