Introduction of production performance of stainless steel sphaerocephala pulverizer

The stainless steel sphaerocephala pulverizer uses the high-speed relative motion seen by the movable sprocket and the fixed sprocket to make the pulverized material crushed by the combined effects of tooth impact, friction and material impact. The structure of the machine is simple, firm, stable, and the pulverization effect is good. The pulverized material can be directly discharged from the grinding chamber of the main machine, and the particle size is obtained by replacing the mesh screen with different apertures, and the machine is all stainless steel. The inner wall of the casing is machined to achieve a smooth surface, which changes the phenomenon of rough and powder accumulation on the inner wall of the previous model, making the production of medicines, food, chemicals and other products more in line with national standards and meeting the requirements of GMP.

Stainless steel sphaerocephala pulverizer is suitable for pharmaceutical, chemical, metallurgy, food, construction and other industries. The processing of hard and difficult materials, including plastic, copper wire, Chinese herbal medicine, rubber, etc., can also be used as a supporting equipment for the micro-grinder and superfine grinding machine. Its powder collection chamber adopts a fully enclosed sound-absorbing structure, which can effectively reduce the working noise. The machine is equipped with a cooling device to reduce the machine temperature and make the work more stable. The motor speed of the machine is 5000 rpm. This machine is made of Icr18Ni9Ti stainless steel material and has strong wear and corrosion resistance. It is suitable for processing advanced and corrosive materials. The machine adopts the impact crushing method. After the material enters the crushing chamber, it is impacted by six movable hammers rotating at high speed. The ring gear and the material collide with each other to crush, and the crushed material enters through the mesh hole with the help of airflow. Powder bag, leaving no residue. It has the advantages of high efficiency, low noise, reliable performance and product quality, safe operation, low drug hygiene and low loss.

The material of the stainless steel sphaerocephala pulverizer is fed into the pulverization chamber by the feeding hopper. The impact knives and the fixed knives are simultaneously sheared and pulverized by the impact of the blade and the knife seat. The material automatically flows out from the outlet due to the centrifugal force of the rotation.

Note: Due to the large difference in materials, the yield varies greatly.

Operation and precautions

1. Before use, first check if all the fasteners of the machine are tightened and the belt is tight.

2. The direction of the spindle running must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may result.

3. Check if the appliance is complete.

4. Check whether there are any hard objects such as metal in the crushing room of the machine. Otherwise, the tool will be damaged and the machine will be affected.

5. The material must be checked for purity before crushing. Metal hard materials are not allowed to be mixed in, so as to avoid damage to the tool or cause burning.

6. The oil cup on the machine should be filled with lubricating oil to ensure the normal operation of the machine.

7. Stop feeding before stopping. If you do not continue to use, remove the leftovers from the machine.

8. Regularly check if the same screen is damaged. If it is damaged, it should be replaced immediately.