I. Product Description
TC-EM-1 is a polymeric emulsifier, which is a low molecular weight, high electropositive organic polymer. It has followed advantages:
1. Easy to use, do not need cooking. Reduce cooking equipment for solid starch and lower down technical condition fluctuation for cooking the starch.
2. Use current water to dilute and prepare, without heating.
3. Provide a strong positive charge to the system
4. High emulsion stability
II. Product Feature
Appearance
Red brown liquid
Solid content %
25. 50±0.5
Ionicity
Cation
PH value
3.50~4.50
Viscosity(mpa.s/25℃)
60.0
III. Product Usage Safety Instruction:
TC-EM-1 may be stimulative to skin and eyes, and it is recommended to use gloves and protective glasses when use. If eye or skin comes into direct contact with this product, immediately rinse with plenty of water for at least 15 minutes.
IV. Application
As a emulsifier and stabilizer of AKD,TC-EM-1 can provide a good stability of the emulsion. With the mechanical stirring, it can disperse AKD as required in the production process, which average particle diameter more than 80% can be less than 1.2 microns. It can also maintain a relative long time after the emulsification, and it has a certain electrical neutral to the slurry.
Please note, under high hardness, the hydrolysis rate of AKD emulsion will be greatly improved. So in order to reduce the rate of hydrolysis, the PH value of emulsified should be controlled between 4.5~5.0 by Citric Acid. TC-EM-1 has low PH value, which saves this part of the operation.
For certain application, the usage of TC-EM-1 should also follow the operating instructions of our company.
V. Other Information
Package: 1000Kg /IBC barrel
Storage: in cool and dry place, avoid frozen and sunshine
Shelf life: 6 months.
AKD Emulsifier,Starch Based Emulsifier,AKD Emulsifying Agent,25% AKD Emulsifier Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com
1. In the pens, about 2 meters away from the goose body, a layer of ceiling is made of 1.5-2.5 cm thick white foam plastic panels. The insulation effect of the plastic plate can reduce the temperature of the housing by 2~4°C.
2. Cover the roof of the house with a layer of rice straw, wheat straw, or straw that is 15 to 20 cm thick, and sprinkle with cold water to keep it moist. This will reduce the amount of heat drawn into the circle.
3. The exterior walls of the pens are painted white with lime water or white paint. The roof is covered with white materials, which can enhance the reflection of light and reduce the absorption of heat by the pens.
4. Plant vine climbing plants such as grapes, sponge gourds, pumpkins, etc. around the pen quarters so that the vines cover the walls, the roof, and the pergola. This reduces the amount of solar radiation heat transferred into the pens.
5. Plant flowers and grass around the house to reduce solar radiant heat and reflected heat.
6. Shade the shacks on the sunny side of the house, doors, windows and activities.
7. Install fans in the pen quarters to forcibly exhaust the heat and air in the homes to enhance air circulation.
8. At noon high temperatures, the deep well water that has just been pumped is sprayed on the house with a sprayer, or the roof and the outer wall are washed out. This can enhance heat dissipation and reduce the temperature.
Summer heat is hot, and the temperature of the goose house is high, which will have a certain impact on the growth and development of the goose. Using the following simple methods, the goose house can be effectively cooled, and the goose can pass through the midsummer safely.