Our factory majors in producing Single Port,Double Port and Small Port for infusion bag and bottle in clinical pharmaceutical packaging. The port is used to connect the combined top cap with the infusion bag or bottle .The joint is produced in a clean plant which reaches to 100000-100 million class grade cleanliness .We will have a professional testing for the materials we use before starting production, only when it is proved to be qualified, we will go to the next phase. During the productive process, we will choose some samples from the cargo from time to time to check the quality. For more details , pls feel free to contact us.
Pp Port,Pp Ship Port,Single Fiber Port,Universal Port SUZHOU CRH PHARMACEUTICAL TECHNOLOGY CO.,LTD , https://www.crh-health.com
The air is filtered and heated into the air distributor at the top of the dryer, and the hot air enters the drying chamber in a spiral shape evenly. The liquid is sprayed into a very fine misty liquid droplet through a high-speed centrifugal atomizer at the top of the tower body, and is in parallel contact with hot air, and can be dried into a finished product in a very short time. The finished product is continuously discharged from the bottom of the drying tower and the cyclone, and the exhaust gas is vented by the fan.
Different types of solutions, suspensions, emulsions, and paste materials allow for one-time continuous drying. The drying time only takes 10-30 seconds. Due to the short drying time, the product can maintain a uniform fine particle shape. For the grain, bulk density, moisture and product properties of the product, the operating conditions can be adjusted within a certain range to adjust and control. The management is convenient, the spray drying dryness and the droplet diameter can be slightly adjusted, the hot air distribution is reasonable, the ceiling and the sticking wall are eliminated, and the heat sensitive and non-heat sensitive materials are dried, and the product particles are pressure spray dried. The product is fine. Easy to operate, product fluidity and fast solubility. The high-speed centrifugal spray dryer has a fast drying speed, and the surface area of ​​the high-speed centrifugal spray dryer is greatly increased. The product has good uniformity, fluidity and solubility, high product purity, good quality, simplified production process and convenient operation and control.
The high-speed centrifugal spray dryer is a new type of drying process for gas-liquid two-phase parallel flow, which can spray, dry the solution, emulsion, paste and heat sensitive materials. It is an ideal drying equipment for pharmaceutical bioengineering, chemical industry, etc., which usually evaporates water into a powdery, granular hollow sphere or round granular product that meets production requirements in a few seconds. The high-speed centrifugal atomizer is used to atomize the liquid into fine droplets, and the hot air distributed by the distributor is mixed in the drying tower to rapidly exchange heat and mass, and dry into powdery products in a very short time. . Production control and product quality control are convenient and reliable, and are widely used in the dry production of different kinds of liquid materials.