In operation, there are always many unexpected incidents. Each production link is interlocked, so the stable operation of the equipment is essential, and every failure of the equipment may cause unpredictable losses to the production process and production safety. Therefore, ensuring the safe and stable operation of equipment is an important task of the workshop departments. Effective inspection measures can extend the service life of the equipment, thus greatly improving the business efficiency of the enterprise. The normal operation of the equipment can ensure the smooth progress of production. Below, we make the following list of daily inspection items for the mechanical part of the centrifuge! æ¸…æ´ Cleanliness of hydraulic oil: monthly inspection, if it is abnormal, replace it immediately. ⊙Noise: Confirm every shift, if there is any abnormality, immediately repair. ⊙ Current: Monthly inspection, should be within the rated range. ⊙ Pressure: Confirmed per shift, within the system's rated range. Oyster oil temperature: confirmed every shift, below 55 °C. ⊙Sealing: Check every line and check whether there is oil leakage in each pipeline and installation surface. If yes, turn off the power supply for maintenance. ⊙Check each proximity switch regularly ⊙ Regularly check the setting current of each thermal relay ⊙ Regularly check whether the vibration detecting device is sensitive and reliable ⊙Check if the fan of the power distribution cabinet is in good condition and whether there is cover on the surface å¸ Regularly vacuum the control cabinet (recommended once a month) ⊙ After the power is turned off for a long time, the main circuit must be insulated before it can be energized. ⊙ Periodic calibration of oxygen meter Note: Daily inspection items 1. Main unit: Check the running sound of the bearing daily, the vibration of the machine running, whether there is liquid or gas leakage in each sealing part. 2. Scraper: Check whether the action of the scraper is flexible every day, whether there is oil leakage in each part, whether the scraper shaft and the scraper are loose. 3. Air unit: Check the air unit pressure daily, whether there is water in the water separator, and check if there is oil in the oil mister. 4. Valve: Check the operation of each process valve correctly and flexibly. Note: Check the items regularly (recommended once a month) Drum: Check the corrosion and wear of the liquid interceptor, the backboard and the bottom of the drum, and check the tightening of the drum and the spindle. Spindle components: Check the noise of the spindle gland and the spindle at high speed and low speed. Housing parts: Check the seal of the outer casing and the casing, tighten the bolts and nuts of the parts of the cover, and check whether the flexible pipe connected to the machine is worn or damaged. Transmission: Check the lubrication of the bearing and fill the lubricant regularly. Check the motor and pulley tightening bolts for looseness, check the motor for abnormal noise and temperature rise, and check the motor's acceleration current and current during steady operation. Check the belt for elongation, wear, defects, cracks and aging In order to improve the operating efficiency of the equipment and prevent operational delays or serious equipment damage due to oversight, it is strongly recommended that all operators familiarize themselves with and perform the above checks before starting the operation. More high-speed centrifuge, mini centrifuge information registration: Shenzhen Zuomi Technology Co., Ltd. , https://www.zuomicamera.com