Operating instructions for vacuum packaging machine

1. After receiving the vacuum packaging machine, do not plug in the power directly. Lift the lid of the vacuum chamber first. When it is lifted to a certain height, it will be automatically supported by the gas spring. Take out the random accessories and instructions. If you have time, please take a look at the instructions and follow the instructions to use the maintenance.

2. Use a Phillips screwdriver or an Allen key to open the side cover of the machine. Observe the oil position through the vacuum pump oil mirror. Normally, it is at 1/2 to 2/3 of the oil mirror. After the inspection, install the side cover.

3. Plug in the power cord and turn on the power switch.

4. Set parameters such as pumping time, heat sealing time, and heat sealing temperature on the front operation panel. The pumping time depends on the package size and packaging requirements. For example, the larger the bag, the longer the pumping time is, the normal 15s or so; the heat sealing time depends on the thickness of the bag, the thicker the bag, the longer the heat sealing time, and vice versa, normal 1.0-1.8s; heat seal temperature indicator is adjusted to "medium temperature".

5. Pack the products that need vacuum packaging, then put the open end on the sealing strip and pay attention to keep the bag straight. If you are a small bag, you can pack multiple bags side by side.

6. Press the transparent plexiglass cover and keep it for 1-2s. After the cover is closed, it can be loosened. The vacuum packaging machine will be packaged according to the set parameters, and finally automatically give up and open the lid to the next packaging process.

7. After using the machine, please turn off the power first, unplug the power cord, then lift the glass cover to the high position and press the “locking button” on the back side of the machine to close the cover to ensure the safety and cleanness of the equipment.

The vacuum packaging machine can automatically extract the air in the packaging bag and complete the sealing process after reaching a predetermined vacuum. It can also be filled with other nitrogen mixed gas, and then the sealing process is completed.