Shaoxing Wine 3Yrs,Handmade Wine Stored For 3 Years,Blending Of 3-Year Old Wine,Pure Handmade Rice Wine Zhejiang Shanying Trading Co.,Ltd. , https://www.shanyingtrading.com
1. Oscillating incubator should perform regular inspection every three months during continuous operation; check fuses, control components and fastening screws, and whether water droplets, dirt, etc. fall into the motor and control components.
2. The bearing of the transmission part has been filled with the proper amount of grease before leaving the factory. During the continuous operation, the instrument should be filled with grease once every six months, and the filling amount accounts for 1/3 of the bearing space.
3. The compressor should avoid continuous starting.
Second, the digital display biochemical incubator maintenance and maintenance:
1. Check if the heating furnace wire is damaged when the heating (cooling) is abnormal, and repair it in time after damage.
2. When the lighting in the box is abnormal, it is necessary to replace the lighting fixtures in time.
3. Clean the outside of the incubator in time to keep it clean and free of dust. Thoroughly clean the incubator liner once a week with sterile water. Replace different types of disinfectant water every quarter to avoid the emergence of resistant strains.
4. The digital display biochemical incubator observes the temperature of the incubator daily to meet the requirements. If you find an abnormal situation, please ask a professional to repair it.
5. A performance verification of this equipment should be performed annually.
Third, the maintenance and maintenance of the digital display incubator:
1. The instrument suddenly does not work. Please check if the fuse tube is burnt out and check the power supply.
2. The incubator housing should be grounded reliably.
3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm, the side of the box should have a gap of 50mm, and the top of the box should have at least 300mm space.
4. The incubator should be placed in a cool, dry, well-ventilated place away from heat and sunlight. Place it smoothly to prevent noise from occurring.
5. When the incubator is transported, repaired and maintained, it should avoid collision, shaking and shaking. The large inclination of Zui is less than 45 degrees.
6. When the incubator is working in refrigeration, it is not advisable to make the difference between the temperature inside the box and the ambient temperature greater than 25 degrees.
First, the maintenance of the shaking incubator: