Disposable Shoe Cover: Waterproof Shoe Cover,Disposable Surgical Shoe Cover,Protective Disposable Shoe Cover,Disposable Protective Shoe Cover Guangzhou Aikangli Medical Technology Co., Ltd. , https://www.aikanli.com
Over-temperature treatment method for stainless steel reactor: inspection, repair of automatic control system, strict implementation of operating procedures. Secondly, according to the operation method, emergency pressure is applied, and the materials are dosed regularly according to the regulations, the misoperation is strictly prevented, the heat transfer area is increased or the scale is removed, the heat transfer effect is improved, the stirrer is improved, and the efficiency of the board is improved. After the zui is the total valve, off the steam repair valve.
Leakage occurs at the sealing surface of common faults in stainless steel reactors. The cause of the failure is that the screw thread is loose; the sealing surface is damaged. Remedy Retighten the screw; re-polish the polished sealing surface. Replace the inner magnet. Fault phenomenon There is friction noise in the magnetic coupling actuator. The cause of the failure is that the bushing and the bearing are worn out, the clearance is too large, and the inner magnetic steel is bouncing. Replace the bearing and bushing with the manufacturer and supplier. The stainless steel reaction kettle is composed of a pot body, a pot lid, a stirrer, a heating jacket, a support and a transmission device, and a shaft sealing device. The pot body, lid, agitator, shaft seal, etc. are all made of lcr18ni9ti stainless steel. The pot body and the lid are sealed by flange sealing, the lower part of the pot body has a discharging hole, the pot has a stirrer, the pot lid is opened, the stirring observation, the temperature measuring pressure, the steam drawing fractionation, the safety venting, etc. . On the upper welding bracket of the lid, the reducer and the motor are installed, and the stirrer in the pot is driven by the drive shaft, and the shaft sealing device is on the top of the lid.
Our company seeks reputation with quality, develops with variety, strictly performs duties, provides quality products, ensures delivery date, and timely after-sales service. We sincerely welcome new and old customers at home and abroad to call us and come to our factory for consultation and business negotiation.
Destination: Barrier protection for food processing and handling, manufacturing, farming, painting, gardening, household cleaning, cooking, medical, surgical, pharmaceutical, protective, laboratorial, catering and industrial sectors. It is good for workers in hospitals, clinics, electronic workplaces, restaurants, hotels, catering, kitchens, food processing workshops
Composition: LDPE shoe cover is short for shoe cover made of low-density polyethylene. HDPE shoe cover is short for overshoes made of high-density polyethylene. Generally they are called disposable poly shoecover, or simply PE shoe cover. CPE shoe cover, made of chlorinated polyethylene, is good in quality with embossed surface. PP shoe cover is made from spun-bonded polypropylene non-woven fabric, can be coated with polyethylene films to offer so-called PP+PE shoe cover to provide tough, waterproof protection. PP shoe cover is also semi-coated with chlorinated polyethylene, CPE in short. With the above materials we offer our customers LDPE or CPE boot cover, PE boot cover, nonwoven boot cover, PP+PE boot cover.
Description:
A. CPE shoe cover & PE shoe cover: weight per piece available: 1.3g., 1.5g, 1.6g., 1.7g., 1.8g, 2g., 2.2g., 2.5g., 2.7g., 3g., 3.4g., 3.5g., 4g., 4.2g., 4.5g., 5g., 6g., 6.5g., 7g., 7.5g., 12g. with thickness of 0.02mm, 0.025mm, 0.035mm, 0.04mm, 0.038mm, 0.05mm, 0.08mm in various colours of white, yellow, blue, green, grey, pink, etc. Generally shoe cover below 4g. per piece is produced by machine automatically. Heavy duty shoe cover above 4.5g. per piece is made and sealed by hand as it's more thick and needs more elasticized thread.
B. PP shoe cover, PP+PE shoe cover, PP+CPE shoe cover: material weight per square meter: 25g., 27g, 30g., 35g., 37g, 38g., 40g., 50g., 55g., coated with PE completelly or coated with CPE in half as per the buyers' demand. It's tough, durable, breathable, water-repellent, disposable, and environmentally-friendly. Generally we offer white, yellow, green, blue, pink, purple, etc.
C. PP boot cover, PP+PE boot cover: material weight per square meter: 28g., 30g, 32g., 34g., 40g., 42g, 45g., 50g., 55g. coated or uncoated non-woven fabric. LDPE or CPE boot cover: weight per piece available: 13g, 14g, 16g, 21g., 23g, 24g, 28g, 31g, 32g, 33g. in colours of white, blue, red, black, etc. The opening at knee level is elasticated with or without fixation laces at ankles.
Feature: It is economic, convenient, waterproof, oil-proof for multiple usages in kitchen, hospital, hotel, barbershop, beauty salon, working plant, electronic workshop, labs, theatres, etc to protect you from dust, oil, chemicals and water.
Yantai Longxing Chemical Machinery Group Co., Ltd. is located in Laizhou, an excellent tourist city in China. The company has been committed to the design, manufacture and installation of chemical pressure vessels. It is the designated production unit of China National Chemical Equipment Corporation determined by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. It is a professional manufacturer of pressure vessels and thermal oil furnaces of Classes 123 and GB and GC2. The pressure pipe manufacturing and installation unit has passed ISO9001-2000 international quality management system certification. It is the chemical machinery production base of China's chemical machinery industry with large scale, variety zui and quality.