Magnetic stirrers are widely used basic experimental instruments, which bring many problems to our laboratory personnel that cannot be solved quickly by humans. However, when operating and using the stirrer, the following points should be noted:
A CT scan makes use of computer-processed combinations of many X-ray images taken from different angles to produce cross-sectional (tomographic) images (virtual "slices") of specific areas of a scanned object, allowing the user to see inside the object without cutting.
Digital Radiography made affordable, Created to meet the needs of community to hospitals and private radiology practices, it enables the price-sensitive customers to join the drive to go digital.The versatile floor mounted radiography system enables you to go from film to CR to DR.Flooe-mounted easy for installation and operation
Computed Tomography,Medical Computed Tomography Scanning Machine,Medical Ct Scanner,Computed Tomography In Ct Scanner Shanghai Rocatti Biotechnology Co.,Ltd , https://www.shljdmedical.com
1. Do not heat the instrument without liquid.
Second, the agitator should check whether it is safely energized before working.
Third, for the normal operation of the instrument, there will be insulation materials inside the instrument. Therefore, when using the magnetic stirrer for a time, a little white smoke or pungent smell will be found. These are normal phenomena, not product quality. Problem, keep it ventilated.
Fourth, the original device inside the magnetic stirrer has an upper limit for heating, so be careful when heating, do not let the instrument only heat, do not stir.
This will enable Zui to protect the magnetic stirrer to a large extent.
5. After the stirrer is operated, be sure to turn off the heating switch first, and then turn off the stirrer after the temperature has been dispersed. Do not place flammable or explosive materials on the heating plate.
Sixth, to ensure the drying of the operating environment, because in a very humid environment, the instrument is prone to leakage and other phenomena.
7. Be careful during the operation, do not get burnt by the heating plate, because the temperature is relatively high when heating.
8. There is a fuse at the back of the instrument. You can check if it needs to be replaced when the device is still not working.
9. After using the mixer, pay attention to regular maintenance, keep the inside of the instrument dry and clean the surface.
The United-imaging is floor mounted system comprises a radiographic table with integral floor guide rail and a wallstabd. Requiring little room preparation, it is easy to install.
United-imaging according to the international advanced processing mode and standardlize design. the parts are made with precision CNC machine and moulding. Which adopt high degree of standardized, reasonable and compact structure. With reliable, durable and elegant appearance and advanced processing technology.
