1. Cyclotron oscillation: This mode of operation is also called circular oscillation. It oscillates 360° on a horizontal surface. For example, it works in this way, and the oscillated liquid is in a vortex state in the container to achieve a uniform effect. 2. Reciprocating oscillation: As the name suggests, it is the reciprocating oscillation during oscillation. The inertia is used to oscillate the sample. Why should this oscillation method be used? This oscillation mode is much better than the cyclotron oscillation because the liquid is thicker. 3, dual-function oscillation: that is, combining the two modes of cyclotron and reciprocating oscillation. Depending on the sample properties and work requirements, you can choose any way of working. (3) When heated to the temperature you need, the heating will stop automatically and the green indicator light will be on; when the heat in the test chamber is dissipated below the temperature you set, a new round of heating will start again. 4. Turn on the oscillation device: (1) Turn on the oscillation switch on the control panel and the indicator will light. (2) Adjust the oscillation speed knob to the desired oscillation frequency. 5. After the work is finished, turn off the power, set the speed control knob and the temperature control knob to the lowest point. 6. Clean the machine and keep it clean. Zhejiang Industrial Group Co., Ltd. , https://www.xingyeseafood.com