1. The bacteria water should be timely The bacteriostatic water is sprayed when the hyphae appear on the surface of the bed. Method: Increase the ventilation, let the wind blow into the mushroom shed, so that the mycelium lodging, spray 1 kg of water per square meter of bed, sooner or later, so that the thickness of the soil layer 1/2 pervious. After spraying water, combined with strong ventilation, the surface of the bed about 0.5 cm thick is dehydrated and slightly whitish. The mycelium can grow laterally and connect within the thickness of the soil layer and reach a physiological maturity. 2 mushroom water to re-spray Mushroom water was sprayed 3 days after the spraying of bacteria. According to the culture material and the soil moisture status, the mushroom water is sprayed in 4 times per square meter of bed surface, until the soil is wet but the water does not infiltrate. When spraying mushroom water, ventilation should be strengthened. 3 mushroom water should be sufficient The amount of water used for mushrooming and the method of spraying are similar to those of mushroom water. At this point there have been mushroom buds, pay attention to try to make the water temperature and the greenhouse temperature similar, can not make the temperature difference is too large. In addition, there should be a small amount of water spray in the place where there are mushroom buds, and the total amount should be sufficient. However, care should be taken not to infiltrate the culture material. 4. Maintain water to spray To maintain the water to spray, daily according to the temperature, ventilation and other conditions to control the number of water spray and water consumption, to maintain the humidity within the shed is about 90%, covering the surface of the basic moisture. If the soil at the vents and near the doorway is white, it is normal. With the continuous growth of fruiting bodies, the number of water sprays and water consumption should also increase continuously.
Medical Cold Patch
Patch For Diarrhea,Medicated Patches For Arthiritis,Plaster For Diarrhea,Pad For Diarrhea Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xjplaster.com
Patch for diarrhea
[Name] Medical Cold Patch
[Package Dimension] 5cm 4pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give a fast relief for diarrhea.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.