Three-phase high-current generator (referred to as three-phase current booster), our own research and development test equipment, which combines the advantages of similar products at home and abroad, using numerical control technology, strong anti-interference ability, and the previous generation of current riser In contrast, the converter made of a low-power, large-capacity self-tuning voltage regulator and a high-permeability core has the advantages of large output power, small size, and light weight. Mainly used for thermal relays, motor protectors, contactors, breakers, air switches, switchgear, circuit breakers, protection screen verification. Three-phase high current generator operation precautions (1) After the wiring is completed, it should be checked once to see if there is a wiring error and the connector is in good contact. 10000Hz High Frequency LiDAR Module 10000 Hz is one of our 2021 new solutions products,which can be widely used in drone postioning, car anti-collision, intelligent traffic monitoring etc. with high accuracy. We support customized service of different frequency(100hz,200hz,300hz,400hz,1000hz,5000hz,10000hz etc.), you can choose the suitable design. And the LiDAR module is a small size with 43*35*21mm, customers can be integrated to their measure device easily. If you meed any documents(PDF files etc.) of JRT high frequency LiDAR distance sensor, please contact us now. 10000Hz High Frequency LiDAR Module,LiDAR,High Frequency LiDAR Module,10000Hz LiDAR Module Chengdu JRT Meter Technology Co., Ltd , https://www.infrareddistancesensor.com Three-phase high current generator operation precautions
(2) During the test, if there is any fire, and there is no abnormality such as any display when starting up, immediately turn off the power and re-check the wiring.
(3) When the actual wiring, the current output terminal should form a loop, otherwise the instrument will not output current.
(4) The current riser has a random output wire; the output external copper wire is selected according to 10A/mm2. (Standard for two 3 meter test leads)
(5) The capacity of the equipment is designed for short-term operation in 5 minutes. For batch testing, the working time should be less than 2.5 minutes. Wait 10 minutes before proceeding to the next work. If the temperature rise (30 minutes - 24 hours) should be prepared according to the long-term working temperature rise.
Some key features may help:
Accuracy: ±3~5cm(<50m) /±1%(>50m)
Range: 0.1-200m
Resolution: 1cm
Frequency: 100/200/400/1k/5k/10khz
Laser type: 905nm,Class I
Size: 43*35*21mm
Weight: 20g
Input voltage: 8-36V